TUNGSTEN-SERIES
~ RetroSound® Motor-6 with RetroRadio® Display (Customized by Classic Auto Sound)
The RetroSound® MOTOR-6 with RetroRadio® display retains the original look of your classic while offering the most modern features available. Motor-6 has built in Bluetooth® wireless connectivity, so you can safely make hands-free telephone calls through your audio system and also stream music from any smart phone.
The Motor-6 is the only Made-For-iPod®/iPhone® radio for your classic car, and also features built-in Bluetooth® connectivity for hands-free phone calls and wireless audio streaming. Long Beach features a 32,000 color display to customize your radio to your vehicle's interior. Two USB ports for iPod®/iPhone® plus two standard auxiliary inputs are included. Motor-6 has a built-in 25 watts x 4 channel power RMS MOSFET amplifier as well as front and rear RCA pre-outs, plus subwoofer output to add external amplifiers.
All Classic Auto Sound radios are fully bench assembled for your convenience and only require minor adjustment for installation into your vehicle.
- Made for iPod®/iPhone®
- Built-in Bluetooth® connectivity
- 32,000 color display
- Authentic push-button styling
- AM/FM RDS tuner with 30 pre-sets
- Two rear-mounted USB ports for iPod®/iPhone® or USB flash drive
- Two auxiliary inputs for portable devices
- 25 watts x 4 channel RMS power amplifier
- Dual RCA pre-outs for external amplifiers
- Patented InfiniMount adjustable shaft system
- Body can be mounted remotely for custom installation using optional extension cable
- Works seamlessly with any of the RetroSound® range of external amplifiers
Specifications
FM |
|
| Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) with RDS | 87.5-107.9MHz |
| Antenna Terminal | External Antenna Connector |
| Usable Sensitivity | 12.5 dBf |
| Selectivity | 75 dB @ 400kHz |
| Signal to Noise Ratio | 62 dB (Stereo), 67 dB (mono) |
| Harmonic Distortion @ 1 kHz | 0.8% (stereo), 0.5% (mono) |
| Separation | 32 dB @ 1kHz |
| Frequency Response | 30-16,000 Hz |
|
|
| Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) | 530-1710 kHz |
| Antenna Terminal | External Antenna Connector |
|
|
| Dimensions (radio face & push-buttons only) | 3.5”W x 1.5” H x 1.05” D |
| Dimensions (radio body) | 3.96”W x 1.98”H x 4.30”D |
| Power Requirements | 10.5-14.4 volts |
| Current Consumption (during operation) | Max. 15A |
| Current Consumption (car off) | <3.5 ma="" td=""> |
| Output Power (@ 14.4 volts @ 4 ohm @ 1% THD) | 25x4 watts RMS 45x4 Max Power |
| Output Impedance | 4-8ohm |
| Low Level Output (4 channels) | 2.85 volts |
| AUX 1 Input (AUX cable length, 8”) | >300 mV / 6 kΩ |
| AUX 2 Input (AUX cable length, 8”) | >300 mV / 6 kΩ |
| USB 1 Input | (USB cable length, 40”) 5V (USB female input) |
| USB 2 Input (USB cable length, 40”) | 5V (USB female input) |
CLASSIC AUTO SOUND ©Copyright 2024 - Powered by SunShop "Shopping Cart Software"
and is not associated, affiliated or endorsed by RetroSound or it's parent company Retro-Manufacturing LLC.