The RetroSound® Motor-7 features built-in Bluetooth® connectivity for hands-free phone calls and wireless audio streaming, including wireless browsing from any Android®-based phone. San Diego features a 32,000 color display to customize your radio to your vehicle's interior. 1 x USB port for USB flash drives loaded with MP3 or WMA files plus 1 x standard auxiliary inputs are provided.
The Motor-7 has a built-in 25 watts x 4 channel power RMS MOSFET amplifier as well as front and rear RCA pre-outs to add external amplifiers. It mounts seamlessly into your dash thanks to RetroSound®'s patented InfiniMount adjustable bracket system.
All Classic Auto Sound radios are fully bench assembled for your convenience and only require minor adjustment for installation into your vehicle.
Features
FM |
|
Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) - Plus DAB+ Tuner | 87.5-107.9MHz |
Antenna Terminal | External Antenna Connector |
Usable Sensitivity | 12.5 dBf |
Selectivity | 75 dB @ 400kHz |
Signal to Noise Ratio | 62 dB (Stereo), 67 dB (mono) |
Harmonic Distortion @ 1 kHz | 0.8% (stereo), 0.5% (mono) |
Separation | 32 dB @ 1kHz |
Frequency Response | 30-16,000 Hz |
|
|
Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) | 530-1710 kHz |
Antenna Terminal | External Antenna Connector |
|
|
Dimensions (radio face & push-buttons only) | 3.5”W x 1.5” H x 1.05” D |
Dimensions (radio body) | 3.96”W x 1.98”H x 4.30”D |
Power Requirements | 10.5-14.4 volts |
Current Consumption (during operation) | Max. 15A |
Current Consumption (car off) | <3.5 ma="" td=""> |
Output Power (@ 14.4 volts @ 4 ohm @ 1% THD) | 25x4 watts RMS 45x4 Max Power |
Output Impedance | 4-8ohm |
Low Level Output (4 channels) | 2.85 volts |
AUX 1 Input (AUX cable length, 8”) | >300 mV / 6 kΩ |
AUX 2 Input (AUX cable length, 8”) | >300 mV / 6 kΩ |
USB Input (USB cable length, 40”) | 5V (USB female input) |