The RetroSound® Motor-1 with Laguna display looks like your original radio while offering the most modern technologies for your classic. The Motor-1 features authentic push-button styling and an AM/FM tuner with 30 pre-sets. A rear-mounted auxiliary input is included to play portable devices such as iPod® or portable satellite radio. A built-in 18 watts x 4 channel RMS amplifier provided plenty of power to your speakers. Motor-1 features the RetroSound® patented InfiniMount adjustable shaft system to make installation easy in virtually any classic vehicle.
All Classic Auto Sound radios are fully bench assembled for your convenience and only require minor adjustment for installation into your vehicle.
Specifications
FM |
|
Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) with RDS | 87.5-107.9MHz |
Antenna Terminal | External Antenna Connector |
Usable Sensitivity | 12.5 dBf |
Selectivity | 75 dB @ 400kHz |
Signal to Noise Ratio | 62 dB (Stereo), 67 dB (mono) |
Harmonic Distortion @ 1 kHz | 0.8% (stereo), 0.5% (mono) |
Separation | 32 dB @ 1kHz |
Frequency Response | 30-16,000 Hz |
|
|
Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) | 530-1710 kHz |
Antenna Terminal | External Antenna Connector |
|
|
Dimensions (radio face & push-buttons only) | 3.5”W x 1.5” H x 1.05” D |
Dimensions (radio body) | 3.96”W x 1.98”H x 4.30”D |
Power Requirements | 11.5-14.4 volts |
Current Consumption (during operation) | Max. 15A |
Current Consumption (car off) | <3.5 ma="" td=""> |
Output Power (@ 14.4 volts @ 4 ohm @ 1% THD) | 18x4 watts RMS 40x4 Max Power |
Output Impedance | 4-8ohm |
AUX Input (AUX cable length, 8”) | >300 mV / 6 kΩ |
All Classic Auto Sound radios are fully bench assembled for your convenience and only require minor adjustment for installation into your vehicle.